Materials
What materials are available for flat cut PVC signs?
Our flat cut PVC signs are made out of polyvinyl chloride (PVC).
Min/Max Heights
How small can flat cut PVC signs be?
They can be as small as 2 inches with a depth of 1/2 inches or less and 3 inches with a depth of 3/4 inch and greater.
How big can flat cut PVC signs be?
They can be as large as 95 inches tall and 46 1/2 inches wide.
Depth
What thicknesses are available for flat cut PVC signs?
Our flat cut PVC signs come in a range of thicknesses from 1/4 inch to 1 1/2 inches. Other thicknesses are available on request.
| 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1-1/2" |
Typeface/Fonts
Can flat cut PVC signs be made in a custom font?
We have a standard selection of fonts or custom fonts for flat cut PVC signs.
Finishes
What finishes are available for flat cut PVC signs?
Vivid, expressive paints are available in a wide variety of curated options and color-matched finishes. Advanced capabilities allow each design to match the customer's brand consistently.
Note: With easy-to-request physical color matching, an additional fee is added.
Install Environment
Where can I install flat cut PVC signs?
Flat cut PVC signs can be installed indoors.
Mounting
What mounting options are there for flat cut PVC signs?
Flat cut PVC signs offer 6 mounting options to choose from. Hassle-free installation guides for mounting are included with every purchase.
| Plain (No) Mount | Flush Stud Mount | Brick/Block Mount |
| Combination All Mount | Double Faced Tape Mount | Stud for Rail Mount |
Plain Mount: Letters come with no mounting hardware. Customer provides own hardware.
Flush Stud Mount: Letters are drilled and tapped to receive included studs. Drilling patterns are required for this installation.
Brick/Block Mount: Studs spaced at 2 5/8 inch on center for standard brick mounting (4 inch height minimum) and 8 inches on center for stud for block (9 inch height minimum).
Combination All: Combination All mounts have stud through a pad on the top and bottom portion of each letter (6 inch height minimum). Mounting procedure is the same as a Stud Mount. Studs can be aligned for brick or block mortar upon request. Drilling patterns are required for this installation.
Double Faced Tape Mount: Double-faced tape mount comes with a VHB, double-faced tape. Volume of tape is based on letter size and thickness. Heavier letters may require tape and adhesive (such as epoxy) to properly secure letters. VHB tape is designed for interior, flat, drywall installations.
Stud for Rail Mount: Stud for rail includes horizontal stud alignment for two rails.
More about Flat Cut PVC Signs
1040.03