Design Guide: Trimless Fabricated Stainless Steel Face Lit

This guide is here to assist you in creating artwork that meets our minimum design specifications for your trimless fabricated stainless steel face lit project. To quickly navigate to a specific section, click the links below.

Letters	Acrylic Face
Bars	Swoosh Radius
Logos	LED
Sheet Info	RGB LED
Minimum Opening	Fillet Radius

Tip: Need to look up a design term? View our glossary of common terms.

Letters

Depth	Minimum Stroke	Minimum Serif	Maximum Stroke	Minimum Size	Maximum Size	Minimum Punctuation
2 in	0.75 in	0.75 in	9 in	6 in	9 in	2 in
2 in	1.0 in	1.0 in	12 in	9 in	24 in	2 in
2 in	2 in	2 in	12 in	24 in	36 in	2 in
3 in	1.5 in	1.5 in	12 in	9 in	24 in	2 in
3 in	2.0 in	2.0 in	12 in	24 in	36 in	2 in

Bars

Depth	Minimum Bar Stroke	Maximum One Piece
2 in	0.75 in	12 in
2 in	1.0 in	24 in
2 in	2 in	48 in
3 in	1.5 in	48 in
3 in	2.0 in	48 in

Logos

Depth	Maximum Area Square Inches
2 in, 3 in	1,296

Sheet Info

	Horizontal	47 in h x 95 in w
	Vertical	95 in h x 47 in w
	Polished	47 in h x 95 in w

Minimum Opening

	Openings: 0.75 in

Fillet Radius

Inside Corners

0.125 in

Note: Fillet is on acrylic only, the can will have corners come to points.

Acrylic Face

Reveal	Sheet
1/4 in exposed	3/4 in
1/2 in exposed	1 in
3/4 in exposed	1 in

Swoosh

Outside Corner: 0.3 in fillet

LED

	Wire Hole	0.375 in
	Standard LED	0.5 in x 1.8 in
	RGB LED	0.625 in x 2.75 in
	Cable	10 ft. long standard
	*No warm white

RGB LEDs

Min. Stroke	Min. Size	Min. Return	Min. Opening
3 in	10 in	3 in	2 in

All artwork is reviewed by Gemini before ordering. If modifications are required on submitted artwork, a Gemini team member will work with you to find a solution. If you have questions about your artwork, please contact us through your Partner Portal account.

More About Trimless Fabricated Metal Face Lit Letters and Logos

Product Overview

Product Specifications, Mounting, and Installation

Project Examples

Pricing

Product Warranty

2130.07