Design Guide: Lit Mini Fabricated Stainless Steel Letters
This guide is here to help you create artwork that meets our minimum design specifications for your mini fabricated stainless steel project. To quickly navigate to a specific section, click the links below.
Note: This design guide is for face and halo lit mini fabricated stainless steel letters.
Tip: Need to look up a design term? View our glossary of common terms.
Letters
1.5 in Depth | 2 in Depth | 2.5 in Depth | 3 in Depth | ||
Height | Min Stroke and Serif | Min. Stroke and Serif | Min. Stroke and Serif | Min. Stroke and Serif | |
Punctuation | 1 in | 1 in | 1 in | 1 in | |
2.5 in | 0.6 in | 0.6 in | N/A | N/A | Block and Upper Case Only |
3 in | 0.6 in | 0.6 in | N/A | N/A | Block and Upper Case Only |
4 in | 0.6 in | 0.6 in | N/A | N/A | Block Only |
5 in | 0.6 in | 0.6 in | N/A | N/A | Block Only |
6 in | 0.6 in | 0.6 in | N/A | N/A | Block or Squared Serif |
7 in | 0.6 in | 0.6 in | N/A | N/A | Block or Squared Serif |
8 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
9 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
10 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
11 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
12 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
Stud Placement
![]() |
Studs placed at least 0.7 inch away from the top and bottom of the letter. |
Minimum Opening
![]() |
0.3 inch for all gauges |
LED
Wire Hole Halo lit |
0.25 in |
Face Lit | 0.375 in |
Standard LED |
|
Module | 0.38 in by 0.622 in |
Strip | 0.25 in wide |
RGB LED | N/A |
Cable | 10 ft. long standard |
All artwork is reviewed by Gemini before ordering. If modifications are required on submitted artwork, a Gemini team member will work with you to find a solution. If you have questions about your artwork, please contact us through your Partner Portal account.
More About Mini Fabricated Stainless Steel Letters
Product Specifications, Mounting, and Installation
2000.06