This guide is here to help you create artwork that meets our minimum design specifications for your mini fabricated stainless steel project. To quickly navigate to a specific section, click the links below.
Note: This design guide is for face and halo lit mini fabricated stainless steel letters.
Tip: Need to look up a design term? View our glossary of common terms.
Letters
| 1.5 in Depth | 2 in Depth | 2.5 in Depth | 3 in Depth | ||
| Height | Min Stroke and Serif | Min. Stroke and Serif | Min. Stroke and Serif | Min. Stroke and Serif | |
| Punctuation | 1 in | 1 in | 1 in | 1 in | |
| 2.5 in | 0.6 in | 0.6 in | N/A | N/A | Block and Upper Case Only |
| 3 in | 0.6 in | 0.6 in | N/A | N/A | Block and Upper Case Only |
| 4 in | 0.6 in | 0.6 in | N/A | N/A | Block Only |
| 5 in | 0.6 in | 0.6 in | N/A | N/A | Block Only |
| 6 in | 0.6 in | 0.6 in | N/A | N/A | Block or Squared Serif |
| 7 in | 0.6 in | 0.6 in | N/A | N/A | Block or Squared Serif |
| 8 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
| 9 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
| 10 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
| 11 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
| 12 in | 1 in | 1 in | 0.65 in | 0.65 in | Block or Squared Serif |
Stud Placement
 |
Studs placed at least 0.7 inch away from the top and bottom of the letter. |
Minimum Opening
 |
0.3 inch for all gauges |
LED
|
Wire Hole Halo lit |
0.25 in |
| Face Lit | 0.375 in |
|
Standard LED |
|
| Module | 0.38 in by 0.622 in |
| Strip | 0.25 in wide |
| RGB LED | N/A |
| Cable | 10 ft. long standard |
All artwork is reviewed by Gemini before ordering. If modifications are required on submitted artwork, a Gemini team member will work with you to find a solution. If you have questions about your artwork, please contact us through your Partner Portal account.
More About Mini Fabricated Stainless Steel Letters
Product Specifications, Mounting, and Installation
2000.06