Design Guide: Fabricated Stainless Steel Face Lit

This guide is here to help you create artwork that meets our minimum design specifications for your fabricated stainless steel face lit project. To quickly navigate to a specific section, click the links below.

Letters	Recessed Insert
Bottom Stud	Acrylic Insert
Bars	Swoosh
Logos	Face Outline
Sheet Info	LED
Minimum Opening	RGB LED
	Rails

Tip: Need to look up a design term? View our glossary of common terms.

Letters

Depth	Min. Stroke Brush/Paint	Min. Serif	Min. Size	Max. Size	Min. Punctuation
3 in	1.5 in/ 1.25 in	0.5 in	9 in	36 in	1.5 in
4 in	2 in/ 1.75 in	0.75 in	9 in	36 in	2 in
5 in	2.5 in/ 2.25 in	0.9 in	13 in	36 in	2 in
6 in	3 in / 2.75 in	1.25 in	13 in	36 in	2 in

Bottom Stud

	Depth	Max. Size
	3 in	36 in
	4 in	36 in
	5 in	36 in
	6 in	36 in

Bars

Depth	1 in Stroke	2 in Stroke	3 in Stroke
3 in	47 in	95 in	95 in
4 in	n/a	95 in	95 in
5 in	n/a	n/a	95 in
6 in	n/a	n/a	95 in

Logos

Depth	Max Area (Square Inches)
3 in	1,296 sq. in.
4 in	1,296 sq. in.
5 in	1,296 sq. in.
6 in	1,296 sq. in.

Sheet Info

	Horizontal	47 in h by 95 in w
	Vertical	95 in h by 47 in w
	Polished	47 in h by 95 in w
	Painted	47 in h by 95 in w

Minimum Opening

No Returns: 0.25 in

Recessed Insert

	Outside Depth	Inside Depth	Stroke
Min	3 in	0.5 in	0.6 in
Max	4 in	1 in	1 in

Acrylic Insert

Inline	0.125 in
Fillet (inside and outside)	0.025 in
Thickness	0.187 in

Face Outline

Letters
Up to 12 in	0.3 in
13 in - 18 in	0.375 in
19 in and up	0.5 in

Logos
Up to 24 in	0.75 in
24 in - 36 in	1.0 in
36 in and up	1.5 in

Swoosh

Pointed Tip

0.6 inch stroke needed 1 inch from the pointed tip

Round Tip

0.3 in fillet

LED

	Wire Hole	0.375 in
	Standard LED	0.5 in x 1.8 in
	RGB LED	0.625 in x 2.75 in
	Cable	10 ft. long standard

RGB LEDs

Min. Stroke	Min. Size	Min. Return	Min. Opening
3 in	10 in	3 in	2 in

Rails - Painted or Raw

	Size (H x W)	Length
C-Channel	1 in x 2 in	96 in
C-Channel	0.5 x 1.5 in	96 in
C-Channel	1 in x 3 in	96 in
C-Channel	0.5 x 1 in	96 in
C-Channel	1 in x 1.5 in	96 in
Angle	1 in x 2 in	96 in

All artwork is reviewed by Gemini before ordering. If modifications are required on submitted artwork, a Gemini team member will work with you to find a solution. If you have questions about your artwork, please contact us through your Partner Portal account.

More About Fabricated Metal Face Lit Letters and Logos

Product Overview

Product Specifications, Mounting, and Installation

Project Examples

Pricing

Product Warranty

2100.07