This guide is here to assist you in creating artwork that meets our minimum design specifications for your Blade Signs project. To quickly navigate to a specific section, click the links below.
| Available Options | Mounting |
| Mounting Plate | Mounting Arms |
| Lid Assembly Return | Outline Lip |
| Push Thru | Acrylic Insert |
Tip: Need to look up a design term? View our glossary of common terms.
Available Options
| Height | Depth | |||
| Minimum | Maximum | Minimum | Maximum | |
| (1) Blank | 12 in | 46 in | 3 in | 6 in |
| (2) Two Sided Lit | 12 in | 46 in | 6 in | 6 in |
| (3) Two Sided Push Thru | 16 in | 36 in | 6 in | 6 in |
| Single Sided Lit | 12 in | 46 in | 6 in | 6 in |
| Single Sided Push Thru | 16 in | 36 in | 6 in | 6 in |
Mounting
| Arm | Location | |
| (1) Standard | Square Tubing | Top/Bottom/Side |
| (2) Only Plate | Square Tubing | Top/Bottom/Side |
Mounting Plate
 |
Height | 75% of Overall |
| Length | Same as return | |
|
Thickness 12 in - 28 in 29 in - 46 in |
. 0.375 in 0.5 in |
|
| Mount Holes | 0.375 |
Mounting Arms
| Sign Size | Arms | Length (from surface to sign) |
| 12 in - 28 in | One Arm (1.5 in) | 1/4 in - 15 in long |
| 29 in - 39 in | Two Arms (2 in) | 1/4 in - 12 in long |
| 40 in - 46 in | Two Arms (2 in) | 1/4 in - 4 in long |
Lid Assembly Return
 |
1 in standard |
Outline Lip
| 12 in - 28 in | 1 in minimum |
| 28 in - 46 in | 2 in minimum |
Push Thru
| Exposed Acrylic | 1/2 in, 3/4 in, and 1/4 in |
Acrylic Insert
| Inset from original art | -0.25 in |
All artwork is reviewed by Gemini before ordering. If modifications are required on submitted artwork, a Gemini team member will work with you to find a solution. If you have questions about your artwork, please contact us through your Partner Portal account.
More About Blade Signs
Product Specifications, Mounting, and Installation
2220.07